Class 1 Hazardous Locations refer to facilities which deal with flammable gases, vapors, and liquids. Division 2 specifies that these flammable materials are handled, processed, or used in the defined hazardous location, but are not normally present in concentrations high enough to be ignitable.
Does Class 1 Div 2 require explosion proof?
While Division 1 motors in Class I locations must be explosion-proof, Class II, Division 1 motors must be dust- ignition-proof. The characteristics of dust-ignition-proof motors differ from those of their Class I counterparts.
What is a Class 1 Division 2 location OSHA?
Note to the definition of “Class I, Division 2:” This classification usually includes locations where volatile flammable liquids or flammable gases or vapors are used, but which would become hazardous only in case of an accident or of some unusual operating condition.
What are Class 1 hazardous locations?
Class I Locations A “Class I Location” is created by the presence of flammable gases or vapors in the air in sufficient quantities to be explosive or ignitable. When these materials are found in the atmosphere, a potential for explosion exists if an electrical or other source of ignition is present.
Is NEMA 4X good for Class 1 Div 2?
We recommend electrical enclosures meet or exceed a NEMA rating of Type 4 or Type 4X for use in a Class1 Div2 hazardous location when used with appropriate purge systems.
What is the difference between Class 1 Div 1 and Class 1 Div 2?
Class I locations are those in which flammable vapors and gases may be present. Class II locations are those in which combustible dust may be found. Class III locations are those which are hazardous because of the presence of easily ignitable fibers or flyings.
What is explosion proof rating?
To meet the criteria for the explosion proof rating, an enclosure must be able to contain any explosion originating within its housing and prevent sparks from within its housing from igniting vapors, gases, dust, or fibers in the air surrounding it.
Are LED lights explosion proof?
Yes, some LED light fixtures are explosion proof.
If you choose the correct LED light fixture for your location, with the help of an LED lighting partner to ensure it is the appropriate luminaire, then LED lighting is the perfect choice for your hazardous location.
What is a Class 1 Division 1 location?
CLASS I. Class I locations consist of areas where gases, vapors or liquids may exist that have the potential to become flammable or ignitable. There are two different divisions that exist in Class I, Division 1 and Division 2, along with three Zones; Zone 0, 1 & 2.
What is a Class 2 Div 2 area?
Class 2 Division 2, also commonly written with a Roman numeral “Class ii Division 2”, represents an area where combustible dust may be present in quantities sufficient to ignite or explode.
What type of wiring must be used in a Class 1 Division 1 hazardous location?
Two of the allowable wiring methods for a Class I Division 1 location are threaded rigid metal conduit (RMC) and threaded steel intermediate metal conduit (IMC).
What is a Division 2 hazardous area?
Class I, Division 2 or Zone 2 classified locations. An area where ignitable concentrations of flammable gases, vapors or liquids are not likely to exist under normal operating conditions. In this area the gas, vapor or liquids would only be present under abnormal conditions (most often leaks under abnormal conditions).
What is a Zone 2 hazardous area?
Zone 2 is a place in which an explosive atmosphere is not likely to occur in normal operation but, if it does occur, will persist for a short period only. These areas only become hazardous in case of an accident or some unusual operating condition.
What is the difference between Zone 1 and Zone 2?
Zone 1: An area in which an explosive gas atmosphere is likely to occur in normal operation; Zone 2: An area in which an explosive gas atmosphere is not likely to occur in normal operation and, if it occurs, will only exist for a short time.
