I had an old bluestone sidewalk replaced and salvaged the large pieces for other walkways around the yard. I used a cheap 4 1/2 inch angle grinder with a diamond/masonry blade. My stone was more like 2 or 2 1/2 inches so the blade would not cut all the way through.
Can I cut stone with a circular saw?
The best saw for cutting stone is Circular saw with a diamond blade, otherwise known as a stone saw. Using a circular saw to cut stone isn’t very complicated, but it is quite different than cutting other materials.
Is it hard to cut bluestone?
Pry up the pieces and put them back when you’re finished. Building with bluestone is not difficult either. You can expect professional results even if you’ve never done masonry before.
How do you cut a stone with a chisel?
You can cut rock with a hammer and chisel by placing your chisel’s tip on the part of the stone that you want to break. Then you’ll need the chisel and cut a line across the stone where you want the break. Once you find that position, put the chisel at an angle and hit the chisel with your hammer across the line.
How do you cut bluestone on a curve?
A wet saw cuts perfectly straight lines in bluestone.
Drop a slab of bluestone. It will break it into big chunks, which you can use for a walkway through a garden.Use the wet saw to cut the pieces you need for the edges of the walkway.Use the 4.5-inch grinder to cut curved lines in the bluestone.
How do you cut rocks without a saw?
Since diamond saws are very expensive, a suitable alternative for cutting rocks is to use a Dremel drill, which provides sufficient quality at an affordable price. Other options for cutting rocks are Geologist’s Hammer, Chisel, or Grinders.
Is it easy to cut stone?
Cutting stone is hard work, but stone lasts a long time. Make sure to work slowly when cutting stone. Take safety precautions, such as wearing a dust mask and safety goggles, to avoid accident or injury.
