ECOBUST is an Expansive Demolition Agent for breaking all rock or concrete without the use of explosives or jackhammering! It’s powerful, reliable, safe, eco-friendly and completely silent.
How do you break a rock without explosives?
BETONAMIT® is an explosion-free demolition agent which enables a safe and tremor-free breaking up of rock, stone and concrete without the need for special preconditions or infrastructure. BETONAMIT® has a very good shelf life of at least 3 years and can be sent by parcel without problem.
How do you use Dexpan?
Mix one bag of Dexpan at a time Add water first, then Dexpan Mix well, preferably with an electric hand drill with a mixing paddle to achieve a lump free slurry. Use only open pails or containers for mixing Rinse the bucket between batches. Clear any water and excessive dust from holes.
How do I use Ecobust?
Pour 1.5 liters of common cold water in a bucket and gradually add one bag (5Kg) of product. Do not mix more than 2 bags (10Kg) at a time. Mix well, using a mixing paddle, until the powder is completely dissolved in water into a slurry.
What is Dexpan made of?
Dexpan® Non-Explosive Demolition Agent / Expansive Grout is a cement with amazing 18,000 PSI expansive strength when mixed with water. Poured into the same holes where explosives are traditionally placed in, Dexpan® breaks, cracks and splits reinforced concrete and rocks safely, by providing silent cracking.
Which is a step of non explosive demolition?
To use non-explosive demolition agents in demolition or quarrying, holes are drilled in the base rock as they would be for use with conventional explosives. A slurry mixture of the non-explosive demolition agent and water is poured into the drill holes.
Can Dexpan be reused?
Q: Can you reuse dexpan once it’s in powedered state? Product can be reactivated once it completely goes back into powdery state.
How does expanding grout work?
Expanding Grout is a mixture of elements that initiates when water is added to the dry mix. As the grout sets, the material expands, producing 18,000 psi of force on the drill hole it is poured into. The expansive force will cause the rock or concrete to break, in a low controlled demolition.
How long does Dexpan take to work?
Small cracks can begin to appear as early as 12 hours, but waiting for 24, 36 or 48 hours will result in more extensive and wider cracks. Expansion and cracking is slower. Depending upon conditions and factors listed above, it may take 36 hours and up to 4 days for optimal expansion and cracking.
How do you break rocks with Dexpan?
bag of Dexpan®. Mix well to a slurry, no lumps. A drill and paddle is recommended. Dexpan® slurry should be poured into holes within 10-15 minutes after mixing.
Forceful Blowouts may occur once mixed with water! Alkaline Burns may occur. Keep Dexpan® in DRY storage. Keep out of reach of children and pets.
How do you break a thick concrete slab?
Start to break the concrete, starting six inches from the edge and working your way in. For slabs less than four inches thick, use a sledgehammer. For more than four inches thick, use a demolition hammer.
