Everbrite will restore the color & luster of faded painted surfaces & will seal & protect metal from tarnish, fading, rust, corrosion & oxidation. Metal siding, Storage Doors, Garage Doors, Painted Roofs, Signs, Anodized aluminum & more.
How long will Everbrite last?
Everbrite™ has U.V. absorbers and Anti-Oxidants to protect painted metal from fading, chalking and corrosion. It is a homogenous, one part coating so there is nothing to mix. It has an indefinite shelf life in a closed container so there is no waste.
How do you apply everbrite coating?
Make sure that there is good ventilation in your work area. Pour enough Everbrite™, ProtectaClear® or CrobialCoat™ into clean, dry container to be able to completely wet your applicator. Dip the applicator completely into the Coating in the application pan. Apply in smooth, even strokes.
What is Everbrite coating made of?
Everbrite and ProtectaClear are one-part, clear, protective coatings made up of a blend of polymer resins in a solvent base with additives to protect metals from oxidation and UV.
Can Everbrite be used on wood?
Making Wood Good!
Just like metal, wood can fade and lose its beauty. Don’t let this happen to your wood surfaces— our Everbrite coating will seal wood and restore faded wood. Teak surfaces fade to almost white but Everbrite can restore these to look new again.
Can you polyurethane over metal?
You can use polyurethane finish on metal surfaces but you will need to prime or blast the metal before applying polyurethane. Polyurethane is an ideal finish for metal surfaces because it protects the metal, prevents rust, and gives a clear finish on the metal.
Can you clear coat copper?
ProtectaClear is an easy to apply, tough, clear protective coating that will keep your looking like you just finished polishing it. ProtectaClear will protect high-use copper like lamps, copper sinks, copper hardware, copper knick-knacks, copper bowls, and more.
How long does ProtectaClear last on jewelry?
ProtectaClear is a polymer resin. It will never chip crack or peel, it will also never turn yellow. 2 good coats will get you 6 months to a year or longer of wear depending upon the use and abuse that the jewelry goes through.
What is a good clear coat for metal?
6 Best Clear Coats for Metal
EverBrite 4 Oz. Clear, Protective Coating for Metal. KBS Coatings DiamondFinish. ProtectaClear Clear, Protective Coating for Metal. Spraymax 2K High Gloss Spray Clear Coat. Krylon Colormaster Metal Spray-Paint. Krylon COVERMAXX Spray Paint.
Is ProtectaClear waterproof?
ProtectaClear is the perfect solution! ProtectaClear has an impermeable finish that provides outstanding protection against damage caused by corrosion, salt water, salt air, acid rain, pollution, mildew, bird droppings, bleach, etc.
How do you keep metal shiny?
To polish up un-lacquered copper and brass, cut a lemon in half, sprinkle coarse salt onto the cut side and rub the metal, then rinse and dry. Or rub on a paste made of three tablespoons of white vinegar and one tablespoon of baking soda, wipe with a damp cloth then buff.
How long does ProtectaClear take to dry?
ProtectaClear can take anywhere from 1-3 hours to dry between coats depending on humidity. However, the coating will not be fully cured for 4-5 days (air cure).
How do you stop brass from corroding?
To prevent tarnishing, a thin coating of linseed oil or mineral oil can be applied to clean brass with a soft terry towel. Many brass objects are protected with a lacquer finish and should only be cleaned with hot, soapy water.
How do I uninstall Everbright?
To remove the coating: Soak a clean cloth or paper towel in recommended solvent. Using light pressure, move the wet cloth across the surface allowing the solvent to dwell and “melt” the coating. Wipe the “melted” coating up and off of the surface. Repeat the process until the coating is removed.
How long does lacquer last on metal?
Brass Lacquer can be used on knobs, handles, hinges, and other metal fixtures throughout your home. Unfinished brass must be polished frequently to maintain it’s luster. Lacquered brass will last about ten years and does not require frequent polishing. Lacquer protects brass from oxidation.
How do you keep bronze from tarnishing?
If you want to prevent tarnish, keep your bronze item stored or displayed in an area with low humidity and protected from dust and other corrosives. Avoid handling the item with bare hands, and don’t let the bronze piece come into contact with paint or fabrics.
