WHAT IS FPR (FILTER PERFORMANCE RATING)? FPR, or filter performance rating, labels filters based on a number scale from 4 through 10 in addition to a color-coding system. Designed by The Home Depot for brands sold through their stores, including Honeywell, this rating structure is very similar to MERV rating.
Is MERV rating the same as FPR?
FPR, or Filter Performance Rating is a system that specifically developed for The Home Depot (developed by 3M) and only pertains to the brands that are sold in their stores. The rating system is actually similar to MERV.
Is fpr 10 same as MERV 13?
FPR 4 -5 is the same as MERV Ratings 6 – 8. FPR 6 – 7 is the same as MERV Ratings 8 – 11. FPR 8 – 9 is the same as MERV Rating 11. FPR 10 is the same as MERV Ratings 13.
Is MERV 13 too high?
Filters within a MERV rating of 17-20 are almost never necessary in a residential home. A MERV rating of 13-16 is considered hospital level air quality, so it is unlikely your home needs any more than that.
What FPR should I use?
According to Home Depot, filters in the “Good” class are rated listed as FPR 4, and they will block pet dander, dust, and pollen. The next tier is the Better represents 6 – 7, but is listed at 7 FPR, and adds protection against bacteria along with mold spores.
What FPR is MERV 13?
MERV 13 filters are equal to an FPR rating of 10.
What is the difference between MPR and FPR?
MPR, or Micro-Particle Performance Rating, pertains only to products developed by the 3M company; typical MPR ratings range from 300 to 2200. FPR, or Filter Performance Rating, is a filter rating system developed by Home Depot for the brands sold through its stores, including Honeywell; it uses a 1-10 rating scale.
What is MERV rating for Covid?
What kind of filter should I use in my home HVAC system to help protect my family from COVID-19? Minimum Efficiency Reporting Values, or MERV, reports a filter’s ability to capture particles. Filters with MERV-13 or higher ratings can trap smaller particles, including viruses.
What is a good microparticle performance rating?
A good MPR rating to start at is MPR 600. Filters with an MPR 600 rating strike a good balance between filtration efficiency and airflow. If you are susceptible to allergens such as fine dust or pollen, moving up to an MPR 1000 filter is the next step in air filtration efficiency.
Is MERV 11 too restrictive?
In most cases, a MERV 11 air filter isn’t too high for residential use. Generally speaking, anything under a MERV 13 air filter should provide very efficient air purification in a home without impacting airflow.
Can I use MERV 13 in my HVAC?
MERV 13 air filters are the highest-rated air filters for home use. Any air filter with a rating higher than 13 will restrict air flow to the point of which could cause damage to your HVAC system, resulting in an added expense to fix it.
Is MERV 12 too restrictive?
When You Shouldn’t Use High MERV (12+) Filter for Furnace or AC. High MERV filters, specifically MERV 12 to MERV 16 filters, stop more and smaller particles of pollutants, allergens and other junk that leads to bad indoor air quality (IAQ). That’s a fact.
Is MERV 11 or 13 better?
MERV 11 furnace filters have a particle arrestance of a little over 90%. In comparison, MERV 13 HVAC filters have a particle arrestance of around 98%. Naturally, it is significantly more efficient. MERV 11 rated air filters are ideal for those who live in a moderately polluted area, have mild allergies, or own a pet.
