Allow 72 hours before subjecting surface to heavy foot traffic or repositioning furniture. Premature heavy traffic will cause paint failure requiring spot recoating.
Is granite grip good for garage floor?
Interior/Exterior surfaces such as: Porous Concrete, Masonry, Stone and Brick. Ideal for horizontal surfaces such as: Garage Floors, Driveways, Walkways, Patios, Porches and Pool Decks. Surfaces may become slippery when wet. Use caution when walking on surface when moisture is present.
Is granite grip slippery?
Ideal for horizontal surfaces such as: Garage Floors, Driveways, Walkways, Patios, Porches and Pool Decks. Surfaces may become slippery when wet. Use caution when walking on surface when moisture is present.
How long does it take for granite grip to dry?
Allow 3 to 4 hours dry time between coats. Longer dry time required in cooler temperatures and in higher humidity. The floor may be subjected to light foot traffic after 24 hours. Allow 72 hours before subjecting surface to heavy foot traffic or repositioning furniture.
How do you remove Behr granite grip from concrete?
If the coating is failing or peeling, use a paint stripper to remove old coating or scrape/sand down to a sound concrete surface. Scuff sand glossy surfaces. Clean and spot etch any exposed concrete. Remove all dust with a damp cloth, allow to dry.
Can I paint over granite grip?
Yes. The BEHR PREMIUM GRANITE GRIP coating must be properly prepared (i.e. If the peeling or flaked coating is removed and the surface is cleaned, a new floor coating can be applied right over the existing BEHR PREMIUM GRANITE GRIP coating.
Can I just paint my garage floor?
If your garage floor is stained with oil, grease, and rust, you can easily give it new life with a coat of concrete floor paint. Concrete floor paints are available in both oil-based (alkyd) and water-based (latex) forms, both formulated to resist stains and dry to a satin, non-slip finish.
