Unscrew the screw located at the buckle end to disassemble your belt. In case your belt does not have a screw, use scissors to snip into the back of the leather holding the buckle. Cut fully across and remove the excess leather tab, then snip through the thread and cut open the remaining flap to detach the buckle.
How do you cut a leather belt that’s too long?
How to Cut a Belt That is Too Long – Step by Step Guide
What you will need – ruler, screwdriver, paper knife.Measure the excess leather.Unscrew the buckle.Remove buckle screw, belt loops and other parts.Mark off the excess leather.Cut away the excess leather part.
How do you cut a belt off?
Placing the belt on a sturdy work surface, use a screwdriver to unwind the screw and unhook the buckle. If you need to shorten the belt by three centimetres, for example, measure down from the buckle-end of the belt and draw a straight line with the pencil. Cut along the line with scissors, reserving the trimmed part.
What’s the best way to cut leather?
It’s best to cut thin leather of a thickness of 1mm or less with a rotary cutter. Using a hobby knife can pull and crease the leather and make it harder to get a straight line since it’s so fragile and more prone to moving. A rotary cutter allows for even pressure to be applied to a larger area.
How do you measure and cut a belt?
To determine your belt size, measure your waist through your belt loops using a tape measure. The resulting number of inches or centimeters is your belt size. From the middle hole of your new belt, measure out the number of inches of your belt size. This is the point where you will cut the belt.
Can I cut a belt that is too long?
If you have a belt that’s too long, the traditional fix is to punch an extra hole in it. But this lengthens the hanging tail of the belt, and that can end up looking ridiculous (as illustrated above ). A better fix is to shorten the belt from the buckle end.
