To determine the height of the curtain panel, measure the height of the door frame and add 4 inches. Most doors are 80 inches high, so the typical curtain panel for a sliding door would be 84 inches high.
How high do you hang curtains on a sliding glass door?
Typically a curtain rod is mounted 3-6 inches above the height of the sliding glass door, but again, its actual height is pretty much determined by the length of the curtain or drape. It is also important to determine the width of the curtain rod to make sure that it is centered properly over the sliding glass door.
How do you know what size curtains to buy?
Measure the width of the rod from left to right. A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.
How do I measure curtains?
Measuring Curtains
Measure the full width of the curtain pole or track not the window, excluding any fixtures or finials on the ends. If your curtains are pencil pleat, tab top or eyelet, double this width measurement to account for the way the curtains will be ‘gathered’ at the top.
What is the standard size of a sliding glass patio door?
A standard sliding glass door is 80-inches tall with a width varying from 60 inches to 72 inches depending on the space. In most homes, doorframes are measured to a standard size to make door replacements easy.
How wide should curtains be for 72 inch window?
Let’s say you want standard, thick curtains to cover your 72-inch window. You’ll want to look for curtains that measure between 144 and 180 inches wide. Bear in mind that this is the total width to aim for, not the width for each curtain if you intend to have two (one on either side).
How do you measure a door for curtains?
For the width, take your steel tape measure and take the full length measurement of your pole or track. For pencil pleats on a track, measure the drop by starting from the top of the track, and for pencil pleats on a curtain pole, measure from the eye of the curtain rings (where you’ll be hooking your curtains into).
How high should a curtain rod be for 84 inch curtains?
The length of the curtain dictates the height of the rod. If you buy 84-inch-long curtains, the rod must be mounted roughly 84 inches from the floor if the curtains hang from the rod without rings. This lets the hem of the curtains brush the floor.
Can you put curtains on sliding glass doors?
The long curtains can cover the entire wall, not just the sliding glass doors. Not all sliding glass doors are huge but even the smaller ones need curtains if you value your privacy. Areas such as the kitchen don’t need those heavy curtains like bedrooms do. The curtains don’t have to block all the light.
How do you hang curtains on a slider?
Thread the curtains onto the rod if you are using curtains with a pocket top or closed loops or rings at the top. Set the curtain rod on all three brackets. Attach the finials, if any, to the ends of the rod. Hang hooked curtains onto the rod after you have attached the finials.
How far should a curtain rod extend past window?
Curtain rods should extend at least 3 to 6 inches past the window frame. Just as hanging curtains above the window frame makes the window appear taller, Bob Vila writes that extending the curtain rod past the window frame makes the window appear wider.
How high should curtains be hung above patio door?
Make it about 8-12″ above the door. If you ever add crown molding you will be happy that you have it lower. Also add some more detail and thickness to your curtains. It will help make the room feel warm and inviting!
Where should curtain rod brackets be placed?
Each bracket should be placed at the height you previously determined and about four to six inches from the side of the window frame. (This will allow you to open the curtains completely.) Check to make sure your pencil marks are level otherwise the entire window treatment will be crooked.
How much wider should curtains be than the window?
How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod. That means if you are ordering Grommet style or Rod-pocket style, the total drapery width should be at least 2 times the window/rod widths.
How far below the window should curtains hang?
1″ below the bottom of the window apron. Crisp and unfussy. These aren’t as popular as they used to be, but apron curtain lengths are still acceptable and undeniably practical. Your curtains won’t gather dust and dirt from the floor, and they’ll be easy to open and close.
How wide should curtains be for 60 inch window?
How wide should curtains be for a 60 inch window? For a 60 inch (152.4cm) window, you need curtains with a finished width at least 1.5 times that, but better are those with twice that width and even three times the width for sheers.
