To shorten a chandelier rod, you will want to begin removing the links one by one. It is the links that determine how low a chandelier is to the ground. By removing the links, the chandelier will lock into a higher position. It’s important to do this carefully to make sure the chandelier is still locked correctly.
Can you shorten a pendant light chain?
Chandeliers or or swag lamps are often suspended from chains with the electric cord woven in and out between the links. Shortening the chain, for whatever reason, is a simple process involving no electrical knowledge. Find a helper to hold the weight of the chandelier or light fixture while you are working.
Can you shorten the length of a chandelier chain?
Locate the split or joint on the chain link that you will remove; the joint is typically in the middle along one side of the link. Grip half of the link with a pair of pliers and use a second pair of pliers or an adjustable wrench to twist the other half, separating the link at the joint.
Can you shorten a hanging light fixture?
To shorten a light fixture, you can contact the manufacturer and ask if they can provide you with a shorter down rod or parts to assist you with reducing the height of the fixture.
Is it OK to swag a chandelier?
If hiring an electrician, drywaller, and painter is our of your budget (or your landlord won’t allow it), it’s okay to choose a light fixture with a cord or chain and swag it to meet your needs!
How far down should a chandelier hang over a table?
The general rule when you hang a chandelier for the dining room is that the lowest part of the light fixture should be 30-36 inches above the dining room table’s surface. This standard is based on the assumption that your ceiling is 8-foot high.
Can you add chain to a chandelier?
Using chain allows you the flexibility to add or remove links of chain and easily change the hanging height of a chandelier. This is especially useful if you’re installing in a space where you don’t know the ceiling measurements or how high exactly you’d like to hang the chandelier.
How do you shorten a light fitting cable?
To shorten this, push the cable through the lower hole making a large loop, then simply pull that loop back through the top hole. In both situations you will have a surplus of cable in the ceiling rose.
