To turn the controller back on, use the center button to return to the home screen and allow the controller to go to sleep in that position. To turn your controller off, press the button until the icon and Off is displayed on screen. After a short period of time the display will shut off to retain battery power.
Why is my Hunter irrigation system not working?
The most common reason your sprinklers are not watering is because the rain sensor is active. Do you have a rain sensor on your sprinkler system? If so, slide your sensor bypass switch into the “BYPASS” position (on an SRC, turn the dial into the RUN (Bypass Sensor position).
How do you program a hunter water system?
How to Program Your Hunter X-Core Sprinkler System
Step 1: Set The Current Time. First, you will want to ensure that the current time is correct. Step 2: Set the Start Times. Next, turn the dial to “Start Times”. Step 3: Set the Run Time. Step 4: Set the Watering Days. Step 5: Test Coverage. Step 6: Finished!
How do Hunter nodes work?
The NODE uses standard Hunter controller programming with three programs (A, B, or C) and four start times per program . On standard Hunter controllers a dial is used to scroll between the programming functions . However, on the NODE the button is used to quickly and easily create the irrigation program .
What does the umbrella mean on Hunter node?
From the Idle Mode, press and hold the left arrow (
Why did my sprinklers stop working?
If your sprinkler system is not getting water, a number of things could be the culprit: The backflow may be off. If the handle on your backflow valve gets inadvertently shut off, it restricts any water from flowing past the backflow and to the sprinkler system valves. Your rain sensor might be faulty.
Why is my controller not starting the watering cycle?
Check the water supply
If the valve opens and sprinklers turn on, your valve is working and you’ll need to check the controller and field wiring. If the valve did not turn on any of the sprinklers, the water to the valves is still off. Find the irrigation isolation valve and open it.
Why does my hunter sprinkler system keep running?
A common reason for a controller to repeat a cycle is too many programmed start times. Only one start time per active program is required, a second start time will cycle the program an additional time. NOTE: In the Start Times dial position, the numbers 1-4 do not represent stations.
