Turn on the code reader and move the arrows on the menu to the “Erase” function and then press “Enter”. Remove the OBD II code reader from the DLC and start the engine. Look at the instrument panel to make sure the airbag light turned off.
What would cause the airbag light to come on?
If your airbag has been deployed and has not been properly reset, the airbag light will be on. If the airbag hasn’t been deployed, the light will come on when the system senses that it cannot activate the airbag; this means that there is some sort of a problem with the airbag system in your vehicle.
How do I get the airbag light off?
Conclusion – How to Reset Airbag Light
Turn your ignition on and off.Restart your vehicle and do a test drive.Examine the passenger airbag switch.Inspect whether seat belts are fastened or working correctly.Verify that the passenger seat sensor is not applied.Use a scanner with an SRS or airbag light reset option.
How do you reset the airbag light on a 2017 Hyundai Elantra?
How to Reset an Airbag Light
Put the key into the ignition and turn the switch to the “on” position.Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.Repeat Steps 1 and 2 two more times.
How do I fix my airbag light on my hyundai?
The seat belt buckle sensor wears out in certain Hyundai models and eventually triggers the airbag warning light. The microswitch inside the seat belt buckle wears out over time and eventually fails to function properly. The least expensive way to fix this problem is to replace the seat belt buckle.
How much does it cost to fix a airbag light?
Number 1 — Reset Airbag Light
You’ll need to hire a professional to come in and examine the airbags before you continue to drive the car. This process can take several hours of time and usually costs a few hundred dollars, although depending upon the type of car it may be up to about $600.
Is it okay to drive with the airbag light on?
The bottom line is that, when your airbag light comes on, it’s vital that you don’t drive any further and have your car checked by a mechanic as soon as possible. Until the problem is diagnosed and fixed, your airbags will not deploy.
Is it bad if my airbag light is on?
When this light comes on, it indicates that a problem has been detected in the system, and one or more airbags may not inflate in the event of a collision. While it’s possible that all the airbags could work as intended even with an SRS warning light, a failure in the airbags is a significant safety concern.
Will airbag deploy if airbag light is on?
When this light is on, that means your airbags are deactivated. It means they will not deploy properly if you get into an accident. If your car’s battery has drained recently, it may have also depleted the backup battery that powers the airbags.
Can a blown fuse cause the airbag light to come on?
One fuse in particular, fuse #13 is a likely culprit. If your airbag light is on and your rear windshield wiper doesn’t work, then it’s a pretty good indication that you need to change fuse #13 and possibly others. Blown fuses can definitely cause the airbag light to come on.
Can you reset airbag light without tool?
In some older cars, though, it is possible to reset the airbag light without a scanner by removing the car battery terminals. Check the wiring system underneath the driver or passenger seat for any loose wires or corrosion in the connector plug. Spray the connector plugs with an electronic cleaner and restart your car.
How do I reset my airbag light manually?
How to Reset an Airbag Light
Put the key into the ignition and turn the switch to the “on” position.Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.Repeat Steps 1 and 2 two more times.
Why does my airbag light keep coming on and off?
The light can come on and off if the airbag system malfunctions, you interfere with the seat belt sensor, a broken clock spring, damaged wiring under the seat, wrong data details sent to the computer system, or the car was involved in an accident causing some damage to the sensor.
Does hyundai warranty cover airbags?
Hyundai is extending the warranty coverage for the driver’s front airbag clock spring assembly on certain 2011-2014 Elantra vehicles, 2011-2013 Sonata vehicles, and 2011-2014 Sonata Hybrid vehicles to 15 years, unlimited mileage, from the date of original retail delivery or date of first use.
Why is my airbag light on in my hyundai Sonata?
There are a few reasons why the airbag light may come on. It may indicate that there is a problem with your seat belts. Another issue could be water damage to the sensors. The SRS light can also light up if the vehicle has been in an accident recently.
How do you turn the passenger airbag off in a Hyundai Santa Fe?
Put the airbag in the Off position:
By default it should be activated so in position ” We ” . Then he surely in the form of a lock , then you will need to insert the key of your hyundai santa fe and turn the key up a notch in order to disable it.
