Warranty for Moen Branded Bath Accessories Limited Lifetime Warranty - If this product fails due to a defect in materials or workmanship at any time during the life of the product, Moen will replace it free of charge, postage-paid. Simply contact Moen at 1-800-BUY-MOEN for replacement information.
.
Besides, does Moen replace parts for free?
Moen Incorporated will repair or replace the product free of charge, postage paid. Simply contact Moen at 1-800-BUY-MOEN for assistance.
Similarly, how do I replace my Moen warranty parts? Replacement parts may be obtained by calling 1-800-289-6636 (Canada 1-800-465-6130), or by writing to Moen Incorporated, 25300 Al Moen Drive, North OImsted, OH 44070-8022. Proof of purchase (original sales receipt) from the original consumer purchaser must accompany all warranty claims.
Just so, how long do Moen faucets last?
20 to 30 years
How do I find my Moen faucet model number?
The model/series number is usually a four or five digit number beginning with "7" or "8" and may be followed by letters. The series number may sometimes be found on the underside of the spout. The series number is often found on the back of the decorative ring located at the bottom of the spout.
Related Question AnswersWhere do I find my faucet model number?
The model number is printed on a tag that is attached to the cold water supply line of the faucet. The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet. The model number, or part number, is typically preceded by "P/N."Is Moen a good brand?
Moen kitchen faucets are one of the best large-scale manufacturers of kitchen faucets in the market today. They have always been on the cutting-edge of innovation and their reputation is excellent. With Moen, you have an excellent opportunity to find the perfect kitchen faucet.How do I know if my Moen cartridge is bad?
Symptoms of a bad Moen 1225 and 1222B Cartridge:- Leaking from the handle, tub spout or shower head when off.
- Difficult to open or close shower valve.
- Difficult to turn shower handle.
- Inability to get very hot or very cold water.
How do I find the model number on my Moen faucet?
The model/series number is usually a four or five digit number beginning with "7" or "8" and may be followed by letters. The series number may sometimes be found on the underside of the spout. The series number is often found on the back of the decorative ring located at the bottom of the spout.How do you remove a Moen faucet handle without screws?
Use an Allen wrench or small screwdriver to remove the screw, then carefully use your hand or pliers to remove the handle of the faucet. The overall trick is how to remove tap handle without screw and find a good place to begin taking apart the faucet handle so you can get to where you need to be.How do you fix a leaking Moen single handle kitchen faucet?
Begin Moen Kitchen Faucet Repair by Disassembling the Faucet Turn off the water valves under the sink and open the faucet to relieve water pressure. Locate the screw cap on the faucet handle and pry it off with a flat-head screwdriver to reveal the set screw holding on the handle. The cap usually bears the Moen logo.Why is my Moen kitchen faucet leaking?
There are generally two causes of water leaking from your Moen faucet. Because pull-out spray faucets have a single handle, the most common cause of the water leaking is the O-ring. Remove the handle by pulling straight up and exposing the cartridge body and O-ring. Remove the O-ring and replace it with a new one.How do I know if my faucet cartridge is bad?
Signs that a cartridge faucet needs repair are water dripping from the spout, difficulty in adjusting the water temperature, hot water entering cold water outlets like toilet supply lines and inadequately heated water at some faucets.How do I know what shower cartridge to buy?
For sink faucets, look at the front of the spout. The logo may also be on the base of the spout, where it meets the sink, either on the front or the back. For shower faucets, look on the round plate (escutcheon) behind the handle, on the handle itself, or perhaps on the actual valve behind the wall.How do you remove a Moen faucet handle?
Some Moen faucets have handles that remove by loosening the screw in the back of the handle. To loosen this screw use a 3/32" hex wrench. After the handle has been removed unscrew the spout collar nut by turning counterclockwise then lift and rotate the spout.How do I return a Moen faucet?
Refer the customer to the Moen Consumer Service Number 1-800-BUY-MOEN (1-800-289-6636).Process for Moen Wholesale Defective Returns
- Ensure the Returns Authorization No. is clearly visible on the outside of every carton being returned.
- Only the items shown on Returns Authorization form are authorized to be returned.
