The gas igniter wire is loose, broken, shorted, damaged: If there is no spark at all and if the appliance has power, the problem may be a loose or disconnected wire between the control module and the igniter, or a wire that has shorted.
Why is the igniter on my stove not clicking?
If one or more of the surface burners is not trying to light (not clicking), please check the following: Make sure the correct burner is selected. Match the burner to the correct switch. Verify that the burner knob was first turned to the Lite position.
How do you test a stove igniter?
The Oven Igniter
For a “hot surface” or “glow bar igniter” you can test their power continuity using a multimeter. Simply insert both leads onto the terminals for the igniter and measure the resistance. If it shows resistance, it has continuity.
What Kenmore stove do I have?
The model number on many ranges is located on a plate that is on the frame in front of the right or left front leveling leg of the range. To view this plate, pull the bottom drawer out. On some ranges, the model number plate is located on one side of the oven door opening.
How do I clean my Kenmore oven igniter?
Clean the igniter with a toothbrush to remove dirt and debris. Gently scrub the surface of the igniter with the toothbrush and softly blow on it when finished to remove the debris. This will facilitate better sparking.
How do I know if my oven igniter is bad?
Turn the oven on and then open the broiler drawer. If the glow bar igniter is getting voltage it will glow unless it is broken. If it’s weak, it will glow but it will not pull enough current to open the gas valve. If you do not see a red glow, the igniter or the control board has likely failed.
Can I manually light my gas oven?
You can still manually light nearly every modern gas stove with a match or lighter, even if the igniter is broken. Matches are safer and will work better than typical cigarette lighters.
