Low Maintenance
When looking to resurface your pool, it’s smart to look into how much maintenance, time and money you are willing to put into it after it’s finished. If you don’t want a pool that requires a lot of brushing or that will easily stain, a pebble pool surface is a good idea.
How long does Pebble Tec pool last?
Durability: A Pebble Tec surface should last 20+ years with the proper care and maintenance. A plaster pool should be re-plastered approximately every 5 years.
Does Pebble Tec hurt your feet?
Pebble Sheen is not very rough on the feet, whereas Pebble Tec might be. Pebble Sheen is an excellent product. You shouldn’t be looking at patio rock for your coping. You need a thickness of about 1-1/2″ on your coping.
What is the cost difference between plaster and Pebble Tec?
Thanks to its relatively simple look and material makeup, pool plaster is a lot less expensive than Pebble Tec®. White plaster costs about $4 for every square foot of pool surface. Meanwhile, a pebble finish, like Pebble Tec® or Pebble Sheen®, can easily cost $10 or more per square foot.
What is better than Pebble Tec?
River rok is good alternative, stones are somewhat smaller and smoother than pebble tec. Can also custom the colors to your liking.
How do you maintain a Pebble Tec pool?
Here’s what you need to do to maintain that perfect score:
Clean regularly. Use a skimmer to remove all debris and brush the pool surface once a week. Maintain water levels. Sunlight and temperature lead to evaporation, so the water level will need to be monitored. Circulate the water. Keep chemicals balanced.
Does Pebble Tec crack?
Hairline cracks are defined as cracks that do not threaten the integrity or stability of the product, nor prevent the continued and normal use of the product. These hairline cracks are not covered by the warranty.
Is Pebble Tec The best?
Pebble Tec® is a newer trend and has become popular in the last couple of decades for good reason. While it is more expensive than plaster, it is the highest quality pool resurfacing material available due to its longevity and ability to hide chemical residue.
Do you need to brush Pebble Tec?
DO. brush your pool. It is recommended that you brush a PTI pool finish three times a day for the first three days and two times a day for the next ten days. Using a standard, nylon (very important) bristled pool brush.
Does PebbleTec last longer than plaster?
Pebble Tec is extremely durable. Compared to plaster pools that only last between 6-8 years, Pebble Tec pool finishes can last from 10-15 years.
How thick is PebbleTec applied?
The cream hardens and becomes a protective layer that is calcium carbonate and cement. It is approximately the thickness of two to three sheets of paper.
How thick can you apply PebbleTec?
The Pebble Tec® interior shall be finished to a semi-smooth finish within limits of established trade practices for a hand troweled surface. Thickness of the material from the face of the gunite/shotcrete structure to the finished Pebble Tec® surface shall be no less than 5/16” thick.
Can you put Pebble Tec over plaster?
To answer your question, yes, you can re-plaster any pool. The original plaster though must be sound in regards to bonding to the original substrate. If there are hollow areas, bubbling, cracking or de-laminating, that must be removed until you find areas where the material properly bonded.
How often should a pool be replastered?
On Average, Replastering is Every 10 Years
So how often do you need to replaster a pool? The short answer is about every 10 years. However, it’s important to consider the factors mentioned above, as they are typical signs that your pool needs to be replastered.
Which is better Pebble Tec or Diamond Brite?
Pebble Tec is more durable than Diamond Brite and can continue to give you service for years without getting damaged. Pebble Tec is mainly used for new swimming pools, while Diamond Brite works best when resurfacing an old facility.
What is Diamond Brite pool finish?
Diamond Brite® finishes are blends of selected quartz aggregates and fortified white Portland cement ideal for new or re-finished swimming pools. Diamond Brite® finishes are factory blended to provide the pool owner with an extremely durable and attractive alternative to traditional pool coatings.
Who competes with Pebble Tec?
Top Competitors of PebbleTec
AQUA PRODUCT. -NVblu.
Can you paint a Pebble Tec pool?
You can’t just use any type of paint to paint the interior of a pebblecrete pool, and your pool surface. We recommend using a high-quality paint that’s been specifically formulated for pools, and provides additional resistance to soiling and staining, and can boost colour effect and reduce wear and tear.
