Rake Trim, which follows the line of the gable roof, can easily be forgotten about if you are not a sider or material supplier. The rake serves to cover the nails and nail flange of the soffit boards on a gable. The rake board, or rake trim, follows the angle of a gable.
What is the difference between fascia and rake board?
The rake board is not the same as the fascia board. They are closely located on the roof, but the rake board runs diagonally on the gable roof while the fascia board runs horizontally. Both protect the roof and the house in general from moisture damage and serve an aesthetic purpose.
Where is the rake board?
Rake board gives your roof and the eaves the finished look you want to really enhance the ambiance of the exterior appearance. This is the name given to the board that you place on along the slope of the roof of your home.
What is the trim under the roof called?
Soffit: The underside of the eaves, or roof overhang, which can be enclosed or exposed.
Is frieze board necessary?
Just as the soffit is helping to keep moisture out of the rafters and the underside of your gables, the frieze board is necessary to help prevent moisture from rain and snow from seeping down beneath your siding, causing issues such as mold, mildew, and wood rot beneath your siding.
What is a rake overhang?
The American Wood Council’s 2012 Wood Frame Construction Manual defines rake overhang as “The horizontal projection of the roof measured from the outside face of the gable endwall to the outside edge of the roof.” Section 2.1. 3.4.
What is the board behind the fascia called?
The soffit board is tucked away under the fascia board. It is usually the board that you see most of from street level. The soffit can be ventilated to allow the flow of air into the roof area. Alternatively, ventilation can be provided over the top of the fascia board.
What is the difference between gable and rake?
Gable: The A-shaped side wall of the home that forms the peak of the roof is called the Gable. The home above has two gables, one on each end of the home. Rake: The rake of the roof is the part that ends over a gable end.
What goes on first fascia or soffit?
Fascia and soffit are installed after the roof installation is finished. It is ideal that soffit and fascia materials be installed before you place tiles or any other type of roofing material on the roof. There are different types of finished and variations that can be used for the soffit.
What is gable trim used for?
Gable trim is used to finish off the edge of your roof. It’s installed on the two high sides of the roof, not the low side of the roof that follows the pitch. There is also a kick-out on the bottom of the gable trim that will help direct water away from your wall.
What is the rake edge of a roof?
Simply put, a roof rake edge is installed to cover the top edge of the siding where it meets the roof. You can think of it as a type of awning that is designed to allow water to flow off the roof and down onto the ground below, instead of down the side of your home.
What is the difference between an eave and a rake?
An Eave is defined as the edge of the roof that overhangs the face of a wall. This is the portion of the roof that protrudes beyond the side of a house or building. In contrast, a Gable (or Rake) is the overhang of a building that occurs on the side that is topped by a gable roof.
What are gables on a roof?
Gable: A standard gable is a slanted or pitched roof that creates flat areas on the front, side or back of the house known as a gable. Homes can have multiple gables. Gable with dormer: Many gable roofs include a dormer, which is a structure that protrudes from the flat wall of a house.
