Red Hot Blue Glue® is ideal for both quick pressurization and demanding conditions (wet or cold weather). Red Hot Blue Glue® does not require the use of a primer, unless specified by local code. APPLICATIONS Red Hot Blue Glue® is for use on rigid and flexible PVC plastic pipe and fittings.
How long does it take for Christy’s red to dry?
Christy’s Red Hot Blue Glue PVC Pipe Cement is the perfect cement option for contractors. This blue cement has a medium body and a quick set time (10 minutes until the product can be handled, 24 hours to cure — varies depending on pipe sizes), making it ideal for plumbers, electricians, and DIYers.
How long after gluing PVC can you run water through it?
Most plumbers will pressurize a water within minutes of glueing the pipe together. Since your line doesn’t hold pressure you only need to wait 30 seconds. That’s what I have done in the past with no problems.
Does hot glue work on PVC pipe?
Plastic is one of the hardest surfaces to bond to but we have found a hot melt glue stick that will bond polyethylene, PVC and PET. This hot melt is commonly used for PE boxes and display units.
Do you need purple primer with Red Hot Blue Glue?
The Red Hot Blue Glue works in wet, dry or humid conditions and can be used without a primer (where codes permit). Weld-On® 705™ PVC cement is a high-strength formula. It can be used without a primer on non-pressure systems (where codes permit).
Can Christy’s red hot glue be used on ABS?
For anything 3″ and under, we use the Christy’s Red Hot Blue Glue. It states right on the can it can be used for PVC, ABS. All my fittings at home also have been done exclusively with the Red Hot glue. No problems after 12 years!
What is blue PVC used for?
Blue pipes are used for potable or drinking water. Green pipes are sewer and drain lines. Lavender or purple pipes carry reclaimed wastewater that undergoes filtration and disinfection treatment before being reused for irrigation.
What is blue plumbers glue used for?
Oatey® PVC Rain-R-Shine Medium Bodied Fast Set Blue Cement is recommended for pool and spa, irrigation, potable water, pressure pipe and DWV applications. It is formulated for wet conditions and quick pressurization, and is easy to apply with included in-lid dauber.
How long does it take Christy’s PVC glue?
Hold the pipe and the fitting together for 30 seconds to prevent the pipe from pushing out and wipe off any excess cement. Allow 15 minutes for proper handling and 2 hours for a full cure.
What is the best glue for CPVC?
Oatey® CPVC Medium Bodied Fast Set Orange Cement is recommended for cold water systems and hot water systems up to 200°F / 93°C. It is approved for Corzan® CPVC piping systems. Its medium body has excellent gap filling properties and is easy to apply.
What happens if you glue PVC without primer?
PVC primer maximizes the strength and longevity of the joint connection. A joint will still weld together without the primer, but the connection will not be as strong as the primer allows the cement itself to penetrate deeper into the material.
How long does PVC hot glue take to dry?
After joining the pipes you must hold them together for 30 seconds until the plastic hardens or they can slip apart. It takes another 15 minutes for the joint to harden to a point at which it can withstand water pressure and two hours to fully cure.
