Lay the pry bar across the brick and position the flat end of the pry bar beneath the lowest nodule on the T-post. With the brick as the fulcrum, push down on the far end of the pry bar and allow the T-post to move up out of the ground a few inches.
How do you attach a wood fence to a T post?
Place a T-post on the ground at a 45-degree angle to a wooden 2-by-6 in a corner.Pound the T-post into the ground until the crossbar at the bottom is under ground level.Slide a wood connector over the top of the T-post, and place it on the 2-by-6 with the flat side touching the wood.
What size pipe fits over a T post?
Fit a 2.5 ft X 1.5 in PVC pipe over each T post to serve as a height extender (Figure 3). Hammer it down until it touches the third strand of barbed wire. You may spray paint the PVC pipe black to improve aesthetics.
How do you build a T post fence?
How to Install a T-Post Fence
Dig a Hole for Each Corner Post. Cut the Post. Create a Guide With String. Dig Holes 8 Feet Apart. Mix Your Concrete. Cut Your Horizontal Braces. Install the T-Posts. Distribute the Tension Evenly.
