The drop test consists of a 400 pound bag of sand 28-32 inches in diameter dropped into the net from the highest surface at which employees are exposed to fall hazards, but not from less than than 42 inches above that level.
When should you conduct a safety net drop test?
(4) Except as provided in this section, safety nets and net installations shall be drop-tested at the jobsite after initial installation and before being used as a fall protection system, whenever relocated, after major repair, and at six-month intervals if left in one place.
What is OSHA’s requirement for fall protection?
OSHA requires that fall protection be provided at elevations of four feet in general industry workplaces, five feet in shipyards, six feet in the construction industry and eight feet in longshoring operations.
Who should inspect safety nets?
5. When should a safety net be inspected? Fall arrest safety nets should be inspected by a competent person during the rigging process and at handover stage to a contractor who is to work above the nets. The user should carry out a visual inspection before commencing work above a rigged safety net system.
How close should safety nets be to the working surface?
Safety Net Systems
Safety nets must be installed as close as practicable under the walking/working surface on which employees are working and never more than 30 feet (9.1 meters) below such levels.
What is a safety net system?
Safety nets are classified as a passive fall protection system which can be installed as either a barrier to prevent a fall, or beneath the work to catch a falling worker. Safety nets are designed to decrease the fall distance, to absorb the energy of a fall, and to reduce the likelihood or seriousness of an injury.
How often should safety nets be drop tested?
Except as provided in paragraph (c)(4)(ii) of this section, safety nets and safety net installations shall be drop-tested at the jobsite after initial installation and before being used as a fall protection system, whenever relocated, after major repair, and at 6-month intervals if left in one place.
What are the ways an employer can protect workers from fall?
Guardrail and safety net systems are two ways to protect workers from falls on the job. If workers are more than 6 feet above the lower surface, some type of fall protection must be used by the employer. midrails, screens or mesh are installed when there are no walls at least 21 inches high.
What must your employer provide to protect you from falling objects?
When work is performed less than 6 feet (1.6 m) from the roof edge, the employer must ensure each employee is protected from falling by a guardrail system, safety net system, travel restraint system, or personal fall arrest system.
What is fall protection in safety?
Fall protection is a part of safety equipment that is used to make working at heights safer. Generally, the term refers to any type of planned system to prevent or minimize falls from heights. When used specifically, the term refers to all measures and deviced used to prevent a fall from occurring.
Who can install safety nets?
03 / Installing safety nets. Safety net installation must be planned and include everyone who is involved in supplying, installing and using nets.
Is a safety net collective protection?
Safety nets are mentioned as an example of the type of collective protection that is the preferred option.
What are the types of safety net?
There are two different types of safety nets.
Knotted construction net.Knotless construction net.
What must your employer provide to protect you from falling objects quizlet?
When employees might be exposed to falling objects, the employer must have employees wear hardhats and erect toe-boards, screens, or guardrail systems to prevent objects from falling from higher levels.
Where are safety nets used?
Safety nets are typically used during steel erection, bridgework, demolition, and maintenance work. Safety nets are an acceptable means of fall protection for holes, open-sided floors, catch platforms and steel/concrete erection.
What are safety nets construction?
Construction safety netting systems catch personnel, debris or both, and are strong and durable for indoor or outdoor use. Industrial safety nets are typically lighter but just as strong and ideal for many material handling applications.
