What to Do When Your Top-Loading Washer Won’t Spin
The Mid-Spin Check. Check the Lid Switch. Look for Jammed Clothing. Balance Laundry Loads. Track the Cycle Progress. Investigate the Washer Belt (if it has one)
How do I force my Samsung washer to spin?
To run a Spin Only cycle on a model that does not have this option on the cycle selector dial, perform the following:
Power the unit on.Press and hold the spin key for approximately 3 seconds. A chime will sound.Select the spin level, if desired.Press the Start/Pause button.
How do I reset my Samsung top load washer?
What you can do instead is power cycle it: Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. This is the closest you can get to a “reset” of the washer.
Why won’t my washing machine agitate or spin?
Common solutions for: My Washer Won’t Spin or Agitate. Inspect the drive belt to determine if it is broken or if it is loose on the pulleys. If the drive belt is broken or loose, replace it. The motor coupling connects the motor to the washer transmission.
How do I troubleshoot my Samsung washer?
Troubleshooting
Unplug the machine. Disconnect the hoses.Remove the detergent drawer by pressing the central locking button.Open the hatch of the drain filter at the bottom of the front panel.Empty the water and clean the filter.Put the washer on a side so that you can access the bottom.
Why Samsung washer will not drain?
It could be because the washer isn’t level or the drain tube is clogged or pinched. Adjust the legs of your washer, as needed, and check the drain tube for kinks or damage. Troubleshoot a Samsung washer not draining with these likely causes and straightforward solutions.
