Scotsman Ice Machine Troubleshooting Guide
Check the room temperature. Check the water temperature. Level the machine. Deep clean the machine. Check the waterline and water regulator valve. When to schedule service.
Why is my ice maker not making ice but water works?
If the water inlet valve is defective, or if it has insufficient pressure, it won’t allow water to flow through. As a result, the ice maker won’t make ice. The valve requires at least 20 psi to function properly. Make sure that the water pressure to the valve is at least 20 psi.
How do I reset my ice maker?
Turn The Ice Maker Off and On Again
This is a simple matter of resetting the power to your ice maker. By flipping the switch off and back on, you may be able to reset the functionality so that your ice maker begins to dispense ice again.
How do I force my ice maker to cycle?
If your gear has a small notch in it, then you may need a flat-head screwdriver. Use it to turn your gear counterclockwise until you hear the mentioned click. In both situations, the click that is heard will force the ice maker to cycle.
Where is the reset button on ice maker?
You can find the reset button at the bottom of the ice maker. Remove the ice tray to locate it. Remove the ice tray. The red button you see is the reset button.
Can water filter cause ice maker not to work?
If your ice maker is not working there are several potential reasons including a clogged or partially clogged water filter. Read ton learn more about this possibility as well as other common reasons for an ice maker not to work.
How often should a Scotsman ice machine be cleaned?
Even with the best water con- ditions, every ice machine should be cleaned and sanitized at least twice a year. In some applica- tions, where air or water quality is poor, machines must be cleaned more often. Even ice machines equipped with purge valves must still be cleaned at a minimum of every six months.
How long does it take for a Scotsman ice maker to make ice?
After about 20 minutes the machine will begin to release the ice, this is called the harvest cycle. Observe the first cube harvest: Check the size of the ice cubes. Note: The normal size of the ice cube has a 1/4″ depression in the wide end.
How do I reset my Scotsman cm3 ice machine?
When you have located the control panel, the reset can be done easily by pushing and holding down the “off” button until the machine turns off. Wait a short amount of time (10 seconds should be sufficient) and then push and hold the “on” button for a short time.
How do you turn on a Scotsman ice maker?
Switch the main power switch to “On.” Push the “On/Off” switch to activate the machine. Wait for the “Ice Making” light to illuminate. Water will begin to drain and the water pump and motor will begin to work.
