Its not just the travel, the front shock valving has to be far more aggressive, because it has to damp a much stiffer spring with much less movement. At the back the shocks can be a bit more lazy, lots more fluid displacement, so the shocks can be valved softer and still damp perfectly well.
Should I replace all my shocks at once?
Shocks and struts should always be replaced in pairs or, better yet, all four, for even, predictable handling and control. After all, all four have been on the vehicle for the same number of miles and worked under the same conditions.
Should I change both shocks at the same time?
Why should shock absorbers be replaced in pairs? Any time a shock absorber needs to be replaced, its companion across the same axle (front or rear) must also be replaced to ensure that at least both shocks are in equivalent working condition.
Is it safe to replace only one shock absorber?
Do you have to replace both shock absorbers or struts if only one is bad? It’s not necessary, but it’s usually recommended to replace them in pairs, for example, both front struts or both rear shocks. This is because a new shock absorber will absorb road bumps better than the old one.
Can you use two different shocks?
Yes, you can use two different shocks on your car or truck, as long as you follow a couple simple rules: Always Replace Shocks In Pairs – If you need to replace one shock, you should always replace its match on the other side, even if the other shock appears fine.
Are both rear shocks the same?
Yes they are the same. Really the shocks in the front have the same internals but it’s the perch mount and the other brackets that are welded to the body for the brake lines and ABS sensor lines that are unique to each side. Since the rears have no such mounts, they don’t need to be marked differently.
Should I replace my rear shocks?
The general recommendation is that shocks and struts should be replaced every 50,000 to 100,000 miles.
Are rear shocks sold in pairs?
They’re sold individually. Make sure if you’re buying both you pay attention to if your vehicle uses different right and left part numbers. Some vehicles use the same assembly on both sides but some have different units per side.
Can you have both shocks and struts?
First of all, it is important to note that not all vehicles have both shocks and struts. Some have just struts and some vehicles have only shocks. Shocks are part of the overall suspension, and a strut is a complete suspension assembly. The shocks and/or struts in your car perform two functions.
Are rear shocks important?
Shocks and struts help stabilize your vehicle’s movements, enhancing control when you turn, brake, accelerate or encounter uneven road surfaces. Today’s vehicles use shocks, struts or a combination of the two.
Which way do rear shocks go?
The correct way to mount it is as shown with the boot down and the label facing so it is not upside down. So, If you are not sure which way is up on your shocks or wonder if you can mount them either way, always look at the Bilstein logo. If it is upside down, so are your shocks!
