Typical soaking tubs range in length from 60 to 72 inches. It’s common for the average soaking tub to hold around 250 gallons of water. Soaking tubs are available as single- or two-person bathtubs.
How much room do you need for a soaking tub?
The Magic Number: 6 Inches
As a rule of thumb, the minimum end-to-end (length) additional space you’ll need for a clawfoot, pedestal, or freestanding tub is 6 inches. Any less and the tub will look cramped in the space.
How big is a 2 person soaker tub?
A medium sized two person bathtub starts at around 66.9 inches long with a width of 33.5 inches and a height of 22 inches. The largest of the medium sized bathtubs comes in at 70 inches with a width of 35.4 inches and a height of 22.5 inches.
What is the difference between a bathtub and a soaking tub?
A soaking tub is a freestanding bathtub that is typically oval in shape with enough water depth to allow for total submersion. The purpose of this is to cover your body with water, meaning you will no longer have your knees or arms exposed to the cold compared to more traditional bathtub designs.
What is the best depth for a soaking tub?
So how deep should a soaking tub be? Keeping in mind the water depth measurement, aim for a minimum of 14 to 15 inches of water depth. This level should be deep enough to cover most of a person’s frame. Some tubs, like Japanese soaking tubs, offer water depths of more than 22 inches deep.
How long should a soaking tub be?
Soaking tubs are designed for long, comfortable soaks, so they’re deeper than the typical tub. Standard tub depths allow for approximately 12” of water; soaking tubs should offer at least 14” or more so that the water covers the majority of the bather’s body.
How much space do you need for a soaking tub and shower?
Plan a clear floor space of at least 30 inches from the front edge of all fixtures (lavatory, toilet, bidet, tub, and shower) to any opposite bath fixture, wall, or obstacle. Code Requirements: A minimum space of 21 inches must be planned in front of the lavatory, toilet, bidet, and tub.
Can you have a soaker tub with a shower?
But combining a soaking tub & shower is very possible. Here are a couple of ways it can be done. a. The free standing tub (e.g. clawfoot tub) with a wraparound shower curtain on a circular shower curtain rod.
How far away from the wall should a freestanding bath be?
How far should the distance be between freestanding tub and wall? The distance between your tub and wall should be between 15-18 inches or at least 1 foot.
How deep is a Japanese soaking tub?
These Japanese soaking tubs have built-in seats and are much deeper than a regular American-style tub—about 27 inches deep, so that you sit upright and the water comes up to your chin, making it a true deep soaking tub.
Are all tubs 60 inches?
In general, standard dimensions will give you a rough figure for the size of the bathtub. However, they all vary depending on the shape and type of bathtub you are looking to purchase. For a typical standard, wall-wall bathtub, the measures will be roughly 60 inches long, 30-32 inches wide.
What is the best height for a bathtub?
Shorter ones are great for tub/showers since you are not climbing over a tall rim on a daily basis. When used as a tub/shower we suggest to keep the height around 20″. There is a difference between bathtub height and water height. The bath height is from the bathroom floor to the top of the tub rim – step over height.
Is a soaking tub worth it?
“Soaking tubs can be a great benefit to a bathroom if the homeowner enjoys a bath,” says Willetts. “Relaxing in water is a great way to relieve stress.” While the most common place to install a soaking tub is a big master bathroom, homeowners who live in mild climates choose to put them outside as well.
Is a soaker tub worth it?
A soaker tub allows for a deeper bath experience for full submersion. Its measurements are longer, wider, and deeper to hold more water. Some models of soaker tubs cost more than traditional designs. A soaker tub can elevate the design of your bathroom, if you have enough space to accommodate it.
How much does it cost to put in a soaking tub?
A typical soaking tub averages about $1,000 but can range in price from $600 at the lower end to $13,000 at the high end.
How is bathtub soaking depth measured?
To find the soaking depth of a tub, measure the inside wall of a bathtub from the base to the overflow drain at its deepest point. The overflow drain prevents the water inside from overflowing and is often placed a few inches below the top of the bathtub. The most common bathtub soaking depth is 14″ – 17″.
What is considered a deep tub?
A standard bath tub is 14 to 17 inches in depth. A European style is 18 inches deep and a Japanese (or Greek) style is 22 or more inches in depth. There are numerous makes and models of bath tub styles including built-in, freestanding, soaking, and whirlpool. These tub styles have only frontal exposure.
What shape bath is most comfortable?
The most comfortable bathtub is the KOHLER 5716-VB-0 Underscore Bathtub. It’s an oval tub with VibrAcoustic technology which provides relaxation through vibrations and sound. It also has chromotherapy through the lights for ultimate comfort and bathing satisfaction.
