Great for use on properly prepared interior or exterior concrete or masonry surfaces such as patios, walkways, breezeways, laundry rooms, and basement floors. Do not use on garage floors. The surface must be clean, dry and free of all loose or peeling paint or contaminants.
Does Valspar concrete stain have sealer in it?
The Solid Color Concrete Stain is an acrylic resin, which means it would be, at best, a surface level sealer that would bond to the concrete substrate.
Is it better to paint or stain concrete?
When properly applied, the paint will last a long time without chipping or peeling and can also help hide imperfections or patch work on top of the concrete. In comparison, acid stain actually permeates the pores of the concrete and interacts with different components of the concrete.
Can stained concrete be stained a different color?
Answer: The short answer is, yes. Acid stain will work on any concrete, colored or gray. The big difference will be the final color.
How do you stain concrete with Valspar?
Intermix cans of the same color. Dampen concrete thoroughly with water; remove any standing water or puddles. Use a pump sprayer set to a fine-spray pattern. Apply stain to small sections (4′ x 4′) at a time, spraying in a random circular pattern.
Is Valspar concrete stain water based?
Valspar | Water-based | Concrete Stains & Sealers.
Is Valspar concrete stain an acid stain?
Valspar | Acid-based | Concrete Stains & Sealers.
How long does it take for Valspar concrete stain to dry?
Allow to dry 4 hours before deciding if another coat is needed. A second coat will yield a darker, more uniform color.
Is Valspar semi-transparent stain oil based?
It’s an acrylic, water-based deck stain that’s basically thin paint. Valspar One-Coat Semi-Transparent Stain & Sealer promises to make quick work of your deck project, but both our testing and customer reviews have found that the product fails to deliver on its promises.
Can you stain over sealed concrete?
You cannot acid stain concrete that has an acrylic sealer or any other type of sealer. Remove the sealer with a solvent before attempting to stain the surface. Use a caustic concrete stripper to remove all of the dirt, oil and acrylic residue before attempting to stain the concrete.
Can you stain over previously stained concrete?
Since the color comes from a chemical reaction, there is no easy way to change the color of acid stained concrete; you can add another layer of concrete on top and stain this a completely new color, or you can add to the existing stain to deepen it and possibly change the hue slightly.
Is concrete stain waterproof?
Concrete Staining and Waterproofing Sealer in One Step
Unlike any other concrete stain, it both waterproofs and color stains concrete surfaces in one application.
How long does stained concrete last?
Few materials have the longevity of concrete. And because stains permeate the concrete to infuse it with permanent color, a stained concrete floor or pavement should last a lifetime when properly maintained (see How to Protect and Maintain Stained Concrete .
Does concrete stain last longer than paint?
Concrete stain embeds the surface to color it translucently, while opaque concrete paint covers the top of the concrete but is subject to chipping and peeling when improperly applied. Concrete stains go on quicker, dry faster and take less work than concrete paint, but they offer no significant protection.
Is stained concrete slippery?
Like any hard, smooth surface, stained concrete can become slippery when wet, especially if it has been coated with a high-gloss sealer. For concrete floors or walkways exposed to moisture or in areas with a lot of foot traffic, there are ways you can increase the slip resistance without affecting the color.
