The backset is the measurement from the edge of the door to the center of the bore hole. Most door handle sets feature a 2-3/8″ or 2-3/4″ backset. To determine the backset on your door, measure the distance from the outer edge of the door, to the center, or highest point of the bore hole.
What does a backset mean?
backset in British English
1. a setback; a reversal. carpentry. the distance between the edge of a door and the point at which the door handle is attached.
What is the most common backset for a door?
Standard backsets are either a 2 3/8″ backset, or 2 3/4″ backset. The most common backset is 2 3/8″ but 2 3/4″ is also quite common – usually used on exterior doors. Sometimes it’s easier to measure from the edge of the door to the highest point on the bore hole.
How do I find my backset?
Backset: A backset is the distance from the center of the cross bore, to the edge of the door. To determine the correct backset measurement for your door, you need to measure the distance from the edge of the door to the center of your cross bore.
What is a backset on a door latch?
The backset is the distance from the edge of the door to the spindle mechanism on the latch. Usually a 63mm case measurement will have a 44mm backset and a 76mm case measurement will have a 65mm backset. The backset you choose is where your door knobs will sit on the door (where the spindle goes through).
What is a 60mm backset?
Almost ALL domestic mortice locks and tubular latches are supplied with either a 44mm or 57mm backset length. These equate to case sizes of 2.1/2″ or 3″ in imperial measurements. Commercial (DIN) lockcases are 60mm backset.
How do you measure door latch?
Overall Latch Size = Backset
An easy way to choose which latch you need is to measure from the edge of your door to the centre of your door Stile. Choose the Backset which is closest to this measurement, and the handle will be as central as possible to the Stile on your door.
How do you tell the hand of a door?
To determine the handing of your door, stand outside the door and face the door: If the hinges are on the left hand side of the door frame, you need a left-handed door set. If the hinges are on the right hand side of the door frame, you need a right-handed door set.
What is backset in distilling?
Backset is the liquid from the previous distillation and by using it, we are considered a sour mash distillery. The backset acidifies the mash, making an ideal environment for fermentation. The grain is cooked in the kettle and malt is added to convert the complex starches in the grains into simple sugars.
What is the backset on a mortice lock?
Dimension A: Backset
Backset is measured from the centre of the keyhole to the edge of the lock. Most backsets are commonly measured at either 44mm (for a 64mm (2½”) lock) and 56mm (for a 76mm (3”) lock).
Are door locks universal?
Door levers are left-handed, right-handed or universal. To determine what you need, look at the door from outside the house or room. If the hinges are on the left, look for a left-handed or universal lever. If the hinges are on the right, you need a right-handed or universal model.
