Batten trim or batten molding is a thin strip of trim typically with a rectangular cross-section, used to cover seams between panels of exterior siding or interior paneling.
What is a batten on a cabinet?
Answer. Battens are 3/4″ stabilizing pieces of wood, attached to the back of solid wood doors such as the Valencia (81). They are designed to keep the door from warping or twisting. Battens are 1-3/4″ wide and are placed 2″ from the sides, 3″ from the top and bottom of the door.
What is the molding under cabinets called?
Molding at the bottom of the base cabinet doors and above the toe kick is also known as bottom molding. This molding can be used on kitchen islands to make them appear more like furniture.
What does cove molding look like?
Also known as coving, cove molding is plain, concave-shaped trim employed where walls and ceilings meet. It can also be used on stairs, at the meeting of risers and treads. In essence, cove may be considered a less ornate version of crown.
Where does scribe molding go on cabinets?
Scribe Molding
It is typically used any place the straight edges of cabinetry visibly come into contact with a surface that is bowed or uneven. It is available in 96” lengths and must be field-cut to cover any visible gaps or seams against walls, floors, and ceilings up to ½” wide.
Should kitchen cabinets match trim?
As a simple rule, kitchen cabinets should always match trim as much as they can. Any contrast that you intentionally create should not necessarily be a striking contrast. It’s important to try to create a sense of unity among the different elements being tied together to avoid making the contrast appear accidental.
Do you put shoe molding around cabinets?
Shoe Molding – Also known as corner round is applied to the perimeter of the base cabinets on the floor. It connects the flooring to the cabinet. It is good for hiding flooring imperfections where it might not go exactly up to the cabinet.
What do you put on the bottom of kitchen cabinets?
Liners protect the bottoms of your kitchen cabinets from spills, dents and scratches, but a cabinet storage system also reduces the risk of damage. In deep cabinets, install sliding wire drawers to hold pots and pans. The drawers allow easy access to heavy cookware without dragging it across the floor of your cabinets.
How do you fill the gap between kitchen cabinets and ceiling?
Fill in the space with trim
If the gap between your upper cabinets and the ceiling isn’t particularly large, you can fill it in with trim running along the top of your upper cabinets. This makes for a cohesive, built-in look, and a lot less potential for collecting dust.
What is mid wall molding called?
Definition. Chair rail by definition is molding on an interior wall that is attached horizontally around the perimeter of a room. Most people associate chair rail as a type of trim that prevents chairs from rubbing against the walls.
What is difference between Cove moulding and crown moulding?
Cove molding
performs the same function in the same place on the wall as crown molding. The main difference is the profile; cove molding has a concave profile, which bows inward, while crown molding has a convex, flatter appearance that projects out from the wall.
What is the difference between casing and trim?
Casing is a type of trim. Casing tends to refer to the trim around windows and doorways in a home. But trim can also refer to other types of molding, like baseboards or crown molding. Both are important for home design.
