The wires are typically arranged as follows: red for 24-volt hot, white for heat, yellow for cooling, green for the fan, and blue for common (although the common wire may be a different color).
Where does the yellow wire go on a Nest thermostat?
A yellow wire runs to the Compressor and controls the Air Conditioning system. The Y2 terminal is rare and is used for second-stage cooling. If you have a two-stage cooling system (two settings – high and low) and need them controlled by a single thermostat, then a wire runs to this terminal from the second compressor.
What is the yellow wire on a thermostat UK?
You are only concerned with two wires. The red (live in) and yellow (switched live to the boiler). The yellow is NOT a neutral by the way! According to the diagram, the N/C contact is Q12 which would normally be used.
What are the 5 thermostat wires?
5 Wire Thermostat Wiring (Any HVAC Device – Air Conditioners, Heat Pumps, Furnaces, etc.)
Red wire for power (24V).White wire for heating (connected to W or W1 terminal).Green wire for fans.Blue or yellow wire for cooling (connected to Y).Black wire for “C” or “Common” wire.
What color are thermostat wires?
Thermostat Wiring Tips
If your thermostat controls your heat, you will have a white wire. The Y wire is yellow and connects to your air conditioning compressor. The G wire is green and connects to the fan. Rc and Rh: The red wire(s) are the power source for your thermostat.
What happens if you wire a thermostat wrong?
Potential consequences of improper installation could include: Electric shock. Blowing a circuit breaker. Damaging the thermostat unit, the electrical system or even the AC/furnace unit itself.
What is the Rh wire on a thermostat?
The RH wire refers to “red heating” which means that this is the connection you need in order to power the heating system of your air conditioning unit. Yes, even your air conditioning unit has a heating system to keep the temperature in balance.
What color wire goes where on a Honeywell thermostat?
Meaning of Wiring Terminal Letters
W (white) controls the auxiliary heating elements. Y (yellow) controls the compressor on the cooling system. G (green) controls the fan. C (blue or black) provides a return path to the transformer.
What is a yellow wire used for?
A yellow wire is used as a live wire pulled through a conduit. You’ll find yellow wires used in fixtures like lighting and ceiling fans. Blue Wires – always assume they are live if you have power. Blue wires are also fed through a conduit, usually bringing power to three or four-way switches.
What color is the common wire?
Red, Black, and White are the colors of switch wiring for three-ways. Red and Black are connected to the switches if the White is used for neutral. The White is often referred to as Common, but the colored wires are also used as hot wires.
How do you identify thermostat wires?
Look for connectors that have labels that are the same as your thermostat. For instance, you might find labels like R, W, G, Y, C or O/B. You should find wires attached to these connectors that are the same color as the wires that connect to your thermostat.
Which wire is power on thermostat?
A C-wire, or a common wire, runs from your low voltage heating system (24v) and carries continuous power to your thermostat. In today’s electric market, most newer heating and cooling systems have C-wires, which guarantees compatibility for the installation of all smart thermostats.
